1. Rinsing the Filter Cartridges

Before use, rinse the filter cartridges: Remove the raw water tank and take out the foam pad at the bottom of the cartridge. Fill the raw water tank with municipal tap water (below the max water level), place it back until you hear a 'click', and close the cap. Plug in the machine and place a container (1.5L+) under the water outlet. Press and hold the water button for 3 seconds until it beeps and starts draining. Repeat the drainage process 3 times. Once completed, the purifier is ready for use.

2. Placement

The water purifier must be placed on a fixed and flat surface. Do not put it in direct sunlight which will affect the appearance.

3. Connect Power Supply

Before inserting the power cord plug into the power socket, please confirm that the input voltage is 220V, the minimum current of the socket is greater than 10A, and keep the power plug and hands dry.